Multi-Stabilizer Ladder Leveler | All-in-One Support

The Level-EZE® automatically adjusts up to 9.5 inches in 3/16-inch increments via steel gears. This range accommodates stairs, curbs, rooftops, slopes, gravel, and other uneven terrain without any manual input from the user, making it suitable for the majority of real-world jobsite conditions.

No. Proper installation of the Level-EZE® does not affect the ladder manufacturer's warranty, a position acknowledged by most major manufacturers including Werner. UL does recommend cutting the bottom rung during installation to maintain the ladder's original manufactured length and preserve its duty rating.

Installation takes approximately 25 minutes. Instructions and video guides are available on YouTube for first-time installers. Field installation service is also available through ladder and tool distributors for a small fee, and factory installation is offered directly by major ladder manufacturers including Werner, Louisville, and Bauer.

The Level-EZE® adds only approximately 4–5 lbs to the ladder, compared to 8–11 lbs for typical manual levelers. This lighter weight helps reduce back strain on workers who carry ladders frequently. The total leveler assembly weighs approximately 9.5 lbs but distributes load at the base of the ladder.

Yes. The Level-EZE® is the only automatic ladder leveler that meets all ANSI standards for portable extension ladders. It has been independently tested by Underwriters Laboratories at four times the ladder load rating without failure. OSHA recognizes that 100% of ladder accidents are preventable with proper training and equipment — Level-EZE directly supports this goal.

Maintenance is minimal. Occasionally apply dry silicone spray such as WD-40 Specialist Silicone or Teflon lubricant to the mechanism. Avoid standard WD-40 or greases, which collect debris. In high-dust environments, clean with pressurized water or air. In icy or snowy conditions, inspect and warm the mechanism before use to ensure proper operation.