Premium Ladder Leveler | High-Performance Stability

Level-EZE® uses a precision steel gear mechanism housed in aircraft-quality aluminum. When the ladder is set down, both legs adjust simultaneously via a connected aluminum rod, locking automatically with as little as 9 lbs of applied weight. The leveler engages in under one second — no manual adjustments, pins, or levers required.

The Level-EZE® adjusts up to 9.5 inches in 3/16-inch increments via steel gears, accommodating stairs, curbs, slopes, rooftops, gravel, and other uneven terrain. This range handles the vast majority of real-world job site surfaces encountered by contractors, utility workers, and maintenance crews daily.

No. When properly installed per the included instructions, Level-EZE® does not affect the ladder's duty rating or manufacturer warranty — a position acknowledged by major manufacturers including Werner. UL recommends cutting the bottom rung to maintain the original manufactured length and preserve the duty rating rating.

Installation takes approximately 25 minutes. Step-by-step instructions and video tutorials are available on YouTube for owner-install buyers. Professional field installation is available through ladder and tool distributors for a small fee, and factory installation is offered by major ladder manufacturers including Werner, Louisville, and Bauer.

Level-EZE® adds approximately 4–5 lbs to the ladder, significantly lighter than manual levelers which typically weigh 8–11 lbs. This reduced weight helps minimize strain and back injuries for workers who carry and reposition ladders frequently throughout the day, without compromising structural performance.

Level-EZE® requires minimal maintenance. Apply occasional dry silicone spray — such as WD-40 Specialist Silicone or Teflon-based lubricant — to keep gears moving freely. Avoid standard WD-40 or greases, which attract debris. In dusty environments, clean with pressurized water or air. In icy conditions, inspect and warm the unit before use.