Ladder Surface Stabilizer | Grip Any Terrain

Level-EZE® automatically adjusts up to 9.5 inches in 3/16-inch increments via precision steel gears. This range accommodates stairs, slopes, rooftops, curbs, gravel, dirt, and hillside terrain without any manual intervention, pins, or levers. Adjustment engages automatically the moment the ladder is set down.

No. Proper installation of Level-EZE® does not affect the ladder manufacturer's warranty — a fact acknowledged by major manufacturers including Werner. UL does recommend cutting the bottom rung to maintain the ladder's original manufactured length and preserve the original duty rating per standard guidelines.

Installation takes approximately 25 minutes. Detailed instructions and step-by-step video tutorials are available on YouTube for first-time installers. Field installation service is also available through ladder and tool distributors for a small fee, and factory installation is offered by major ladder manufacturers including Werner, Louisville, and Bauer.

Level-EZE® adds approximately 4–5 lbs to the ladder, with a total leveler assembly weight of 9.5 lbs. This is significantly lighter than manual levelers, which typically weigh 8–11 lbs. The reduced weight helps minimize strain and back injuries for workers who carry and reposition ladders frequently throughout the day.

Level-EZE® meets all ANSI standards for portable extension ladders and has been tested by Underwriters Laboratories at 4x the ladder load rating without failure. OSHA estimates 100% of ladder accidents are preventable with proper training and equipment. Level-EZE® supports OSHA compliance by eliminating improvised leveling and reducing fall risk.

Maintenance is minimal. Apply occasional dry silicone spray such as WD-40 Specialist Silicone or Teflon-based lubricant — avoid standard WD-40 or greases as they attract debris. In dusty environments, use pressurized water or air to clean the mechanism. In icy or snowy conditions, inspect and warm the unit before use to ensure full operation.