Ladder Leveling Posts | Secure Vertical Support

Level-EZE® automatically adjusts up to 9.5 inches to accommodate stairs, slopes, rooftops, curbs, and uneven terrain. Adjustment happens in precise 3/16-inch increments via steel gears. The system locks automatically with as little as 9 lbs of applied weight, requiring no manual pins, levers, or locks from the operator.

No. Level-EZE® does not affect the ladder's duty rating or the manufacturer's warranty when properly installed — a fact acknowledged by major manufacturers including Werner. UL recommends cutting the bottom rung to maintain the original ladder length and duty rating, which is covered in the included installation instructions.

Owner installation takes approximately 25 minutes using the included instructions or YouTube video guides. Field installation service is available through ladder and tool distributors for a small fee, and factory installation is offered directly by most major ladder manufacturers including Werner, Louisville, and Bauer at time of purchase.

Level-EZE® adds approximately 4–5 lbs to the ladder, with a total leveler assembly weight of 9.5 lbs. By comparison, manual levelers typically weigh 8–11 lbs. The lighter construction helps reduce cumulative strain and back injury risk for workers who move and reposition ladders frequently throughout the day.

Level-EZE® is engineered to outlast the life of the ladder. Life testing cycled the unit over 90,000 times with no failure and little sign of wear. The housing is aircraft-quality aluminum, gears are steel, and all steel components are plated and dipped to automotive industry corrosion-resistance standards.

Level-EZE® requires only occasional lubrication with dry silicone spray such as WD-40 Specialist Silicone or Teflon lube. Avoid standard WD-40 and greases, which collect debris. In high-dust environments, clean with pressurized water or air. In icy or snowy conditions, inspect and warm the unit before use to ensure proper operation.