Hands-Free Ladder Leveling | Level-EZE Auto-Adjusting Leveler

For DIY projects, popular laser levels include models from DeWalt, Bosch, and Johnson Level. However, for ladder safety on uneven surfaces, a laser level does not replace an automatic ladder leveler. The Level-EZE® physically adjusts your ladder's feet up to 9.5 inches automatically, keeping you safe without any manual measurements or adjustments.

When you place the ladder on an uneven surface and apply as little as 9 lbs of weight, the Level-EZE® automatically locks both legs in place via a precision steel gear mechanism, adjusting up to 9.5 inches in 3/16-inch increments. When you lift the ladder to reposition it, the device unlocks instantly — requiring no manual input at any point.

Level-EZE® is compatible with both aluminum and fiberglass ladders across multiple types, including extension, stepladder, combination, and platform ladders. It supports ladder duty ratings up to Type 1AA (375 lb). Models are available specifically matched to each ladder type and material for a proper fit and preserved duty rating.

No. When properly installed per the provided instructions, the Level-EZE® does not affect the ladder manufacturer's warranty. This has been acknowledged by major manufacturers including Werner. The UL recommendation to cut the bottom rung during installation maintains the original ladder length and duty rating as manufactured.

Installation takes approximately 25 minutes and can be completed by the owner using the provided instructions and video guides available on YouTube. Professional field installation is also available through ladder and tool distributors for a small fee, and factory installation is offered by major manufacturers including Werner, Louisville, and Bauer.

The Level-EZE® was cycled over 90,000 times during life testing with no failure and minimal wear — designed to outlast the ladder itself. Maintenance is minimal: apply dry silicone spray (such as WD-40 Specialist Silicone) periodically, use pressurized water or air to clean in dusty environments, and inspect the unit before use in icy or snowy conditions.